Showing posts with label interview questions and answers. Show all posts
Showing posts with label interview questions and answers. Show all posts

Wednesday, April 7, 2021

Five things that you shouldn't say in a Job Interview

April 07, 2021

Five things that you shouldn't say in a Job Interview.





Today, I want to talk to you about things that you shouldn't say in a job interview, specifically,





Five things that you shouldn't say bring up mention in Maybe you hated your boss.





Five things that you shouldn't say in a Job Interview




You didn't like working there,





But when he questioned, what was your job like? And you boss? In response, yes I did. I loved working with my boss, I loved people. I like company, I like culture, I love everything about her. It is a disgrace that I need to leave. Sorry, I have to leave. But I am looking for greener pastures, more and more opportunities. I am looking for more responsibility, whatever they say. Except that you didn't like working there, you didn't like what they did or didn't do anything like that. Because if you don't like working there, then you don't like your boss. It will be no time flat, that you will say the same things about them when they hire you.





You'll you'll find reasons not to like them, you'll find reasons not to buy, maybe for two years. And and they will do anything. But if you go to a job and say, you know. I don't care what it is, I'll do it, I'll do anything. Just give it to me too. When you do this, you end up showing a certain level of frustration that it It does not turn out very well. Do you want to go there and go home? Do you want to talk about what you can do, and you are excited to do it. This is what you want. You just don't want to say, yes, I will do whatever you find, I will do this, I will clean the floor. I don't care. Now, you want to go in there specifically, tell them what you want to do with you.





You have to hold tight to your values, you have to hold tight to your beliefs and do what you want to do. Because if they just give you anything, if they just give you any kind of job, they're, you know, two months, we want to guarantee you. And they know that if you go in there and say I'll take whatever you got, and they give to you, you have two three months later to be like, you know what, this sucks. I don't want to do this.





i- And leave them high and dry.





ii-And then they wasted a whole bunch of time.





iii- And they have to go to someone else's interview and miss money, or if your results oriented, it costs money to deal with any of that stuff.





Now, you do want to say is how you can do those things. Would you like to place it in setting. So if it resembles an administration position, you would prefer not to say that you know, an extraordinary pioneer.





i- You want to talk about how you have groups of people, teams that you have built and assembled to work on certain projects you want to talk about.





ii- You don't simply say that your outcomes situated.





iii- You want to talk about the projects that you completed.





On Time under budget, and you want to talk about details, all the results oriented leadership to come out in the context of what happens with us. Okay, we should proceed onward to the following one here. Number four, when they ask you a question, and let's say, you know, you know how to do this, don't tell them that you don't know.





Don't say to any interviewer that I don't want to do that, or I've never seen that, or, you know, I have no idea. That is to say, that is the absolute worst thing you can say, regardless of whether it's reality. But what you do want to say, is war to competency questions they could, they could wipe you out right there in the interview, we dealt with just two competency questions.





One theme you can get away with, but it depends, depends how crucial The question is, because competency questions, pull in a lot of fundamentals. And if you don't know about fundamentals about If you do that says that you don't know a lot about what you do. So never tell them that you don't always try to come close to something, connect the dots. And and maybe we need to pull like line here and say, You know what?
Would i be able to consider that briefly?





And can we circle back around? And they're gonna say yes, but if you pull that Lifeline technique too many times, like maybe maybe more Then once or twice, and that's it. You're done. So you need to Give yourself a little bit Think about it. Connect experiences to what of excitement about this company or about what they're doing it shows that he put nope eration into the interview, you spent no time researching this company reposition.





i- It just basically says that, you know, he showed up and they didn't like the job.





ii- It doesn't work that way.





iii- It doesn't work that way today there are so many hungry into that. And you're interviewing them to you're interviewing them to see if this is something Good luck on your next Have you nap before you go on your next interview.





Follow us on LinkedIn:





Follow us On Facebook:





Click for More Jobs:





Subscribe Our YouTube Channel:





Worldjobsit:-


Thursday, December 24, 2020

Instrumentation Interview Questions and Answers

December 24, 2020

Instrumentation Interview Questions and Answers





Instrumentation Interview Questions and Answers




Q-1 - Which parameters are variable in the process?





Answer - Process has variable parameters.





1 - Pressure





2 - Flow





3 - Temperature





4 - Quality





5 - Level





Q-2 - Which equipment is used for flow measurement?





Answer- For flow measurement





1 - Venturi Tube





2 - Orifice Plate





3 - Pilot Tube





4 - News





5-flow nozzle





Q-3 - Which type of orifice plate?





Answer- There are four main types of orifice plate





1 - Segmental





2 - Concentric





3 - Quadrant Age





4 – Accentric





Q-4 - How will we know if there is an Orifice plate in the pipeline?





Answer-





There is an orifice tab, which welds with the orifice plate. Due to which the outer becomes thicker. And from this we get the indication that the line has been Orifice.





Q-5 - Orifice Tab Q is installed?





Answer- Reason for setting up Orifice Table





We get the Indication of Orifice tab in 1 - line.





2 - There is a marking of the Diameter above it.





3 - His material is also written in Orifice.





4 - The tag number of Orifice is mentioned above.





5 - There is also a marking of the inlet of Orifice.





Q-6 - How is H.P (inlet) side detected in Orifice?





Answer - The orifice has a marking of the H.P (inlet) side. Wherever we come to know the inlet side.





Q-7- How to calibrate -D.P transmitter?





Answer- Transmitter calibration steps are below





1 - First of all we will adjust the zero of the transmitter.





2 - Static pressure test - In which the transmitter is given the same pressure from both sides. After giving presser, we should get zero on DP.





3 - Will do vacuum test - Uniform vacuum is given from both sides. At that time also DP should get zero.





4 - Pressure is adjusted by giving pressure on high side.





5 - Zero can adjust again if needed.





Q-8 - The flow in the transmitter is not high, how will they check?





Answer-





1 - We will flush the transmitter. In this, HP will flush the LP Impulse line.





2 - Zero will adjust by opening the equalization valve.





3 - Will check line jam on LP side. And clean it.





4 - Will check leakage in it.





5 - Calibration will do.





Q-11 - Describe the type of pressure? Types of Pressure?





Answer - There are three main types of pressure





1 - Atmospheric Pressure





2 - gauge pressure





3 - Absolute Pressure





Q-12 - What is absolute pressure?





Answer - The current pressure in any system is called absolute pressure. It can also be understood from the formula below.





Absolute Pressure = Gauge Pressure + Atmospheric Pressure





Q-13 - What is atmospheric pressure?





Answer - The pressure exerted by the pressure of atmosphere is called atmospheric pressure. At high altitudes, the air pressure is low, hence the atmospheric pressure is also low. Usually it is 1KG / CM2.





Q-14 - What is gauge pressure?





Answer- Whatever pressure we see above the atomospheric pressure is called a gauge pressure. Atmospheric pressure is normally 1KG / CM2.





Q15 - What is vacuum pressure?





Answer- Even where there is less pressure than atomospheric pressure, it will be called vacuum pressure.





Q-16 - Which measuring  instrument is used to measure pressure.





Answer- The instrument given below is used to do pressure majors.





1 - Diaphragm





2 - Burden Tube





3 - Bello





4 - capsule





5 - Pressure Spring





Q-17 - Pressure gauge works on which principle?





Answer- Pressure gauge works on the principle of "hook lo". Measuring the stress on elastic is called hook of low.





Q-18 - Describe the parts of the pressure gauge. Parts of pg





Answer-





1 - C 'Type Burden Tube





2 - Sector Gear





3 - Connecting Link





4 - Pinion Gear





5 - Pointer





6 - Hair Spring





7 – Dial





Q-19 - Describe the different method of measuring temperature?





Answer - There are two main methods of measuring temperature.





1 - Mechanical method





2 - Electrical method





Methods of measuring temperature in mechanical method





1 - Temperature can be measured by placing mercury in a glass thermometer.





2 - Bimetallic thermometer can measure temperature.





3 - Pressure Spring Thermometer





Methods of temperature measurement by electrical method





1 - Can check temperature with thermocouple.





2 - RTD - Resistance can measure temperature with temperature detector.





Q-20 - What is the meaning of PT-100 and PT-1000?





Answer -PT-100 means PT means platinum, and 100 means 100 ohm per 00 C temperature. Likewise, PT means 1000 in platinum, and 1000 means 1000 ohm per 00 C temperature.





Q-21 - Why is thermowell applied?





Answer - There are many such applications in the factory, where we cannot bring direct temperature sensor into contact. Thermovale is used to measure the temperature of such place. In addition, there is no chemical effect on the sensor, so no thermosevel is also preferred. Applying a thermowell can protect the sensor from physical damage during operation.





Q-22 - Which materials are used for thermowell?





Answer- The main four materials are used for thermowells.





1 - Alloy Steel





2 - Stainless Steel





3 - Inconel





4 - Monel





Q-23 - Who is used to major low temperature?





Answer- RTD (resistance temperature detector) is used to measure low temperature.





Q-24 - What does skin temperature thermocouple mean?





Answer - Touch with direct material. It does not use any type of thermowell, hence it is called skin thermocouple. It is used to measure the temperature of heater, furnace and fuel gas.





Q-25 - What is the difference between thermocouple and twin wire RTD?
Answer-





1 - In wire RTD the color of the wire is red and white. Whereas the wire of a thermocouple is the basis of its type.





The 2-thermocouple has a plus and minus signal. There is no such signal in RTD.





3-The thermocouple increases the temperature as the temperature increases. The temperature in RTD increases as the resistance increases. On the basis of the vault and resistance, we can also detect RTD and thermocouple.





Q-26 - What are the active and passive components in instrumentation?





Answer- The instrument which needs an ode of spring for operation. It is called Active Component.





For example - devices like transmitter, control valve, PID controller and indicator are called active components.





The device, which does not require any hymn outside, is called a passive component.





For example - devices like RTD (resistance temperature detector), pressure gauge, temperature gauge, thermocouple do not need any external hymn.





Q-27 - Which type of pneumatic control valve is?





Answer - The types of pneumatic control valves are given below.





1 - globe valve





2 - Butter Fly Valve





3 - Ball valve (A) On off valve (B) Continue open valve





4 - Air to open valve





5-year then close valve





Q-28 - How is the signal of temperature from field to PLC, DCS and controller?





Answer–





The signal of the temperature matches both the RTD and the thermocouple. It is transferred in two ways.





1 - Direct - In this the wire of RTD and thermocouple is directly connected to PLC, DCS and controller.





2 - Using the temperature transmitter - The temperature transmitter first converts the signal from the RTD and thermocouple to 4 to 20 MA. This signal is sent to the PLC, DCS and controller.





Instrumentation Interview Questions and Answers





Follow us on LinkedIn:





Follow us On Facebook:





Click for More Jobs:





Instrumentation Interview Questions and Answers